DIFFICULTY: Intermediate

This woodworking project is based off of the classic carnival ring toss game. I have updated this game to fit within a wooden box. This provides you the ability to take and play the game anywhere.

This project require you to have some familiarity with woodworking basics and have experience in working with different types of building techniques.

  • The box is built using only glue to join and attach the corner edges together. This was a first for me. I used “Titebond Ultimate 3” because they claim that it “provides a much stronger bond than the wood itself” and I have to say it is true. No screws were used to hold the box together and I can confirm that the glue bond is solid and I am a believer in the Titebond product. Here is a link to the glue I sed https://amzn.to/2XbC3MG

  • Please note you can choose to glue your box together like I did or use your own method and technique at the end of the day you need to make a box.

This game is perfect for school carnivals, parties and tailgating. In order to make this vintage carnival game you will need to do the following:

Watch The Build Video

Materials

• 1 – 3/4 in. Birch Plywood (Furniture grade A or B, Common: 3/4 in. x 4 ft. x 8 ft)

• 1 – 1/2 in. Birch Plywood (Furniture grade A or B, Common: 1/2 in. x 2 ft. x 4 ft)

• 2 – 2 in. x 2 in. x 6 ft. Select Pine • 1 – 1/4 in. Dowel (Optional)

• 4 – 4 ft. x 1/2 in. Dowel

• 1 – Assorted 18 Gauge Brad Nails | https://amzn.to/2XnI2Ok (Optional)

• 1 Bottle – Titebond III Ultimate Wood Glue | https://amzn.to/2Lrq3Q6

• 1 Pack – 220 Grit Sand Paper Sheets | https://amzn.to/2J5un5P

• 1 Pack – 220 Grit Sand Paper Disks (Optional) | https://amzn.to/309mvG3

• 1 Can – Clear Gloss Spray Paint | https://amzn.to/2Lyuusi

• 1 Can – 3M Super 77 Multipurpose Adhesive | https://amzn.to/2XhZrbg

• 1 Pint – General Finishes DPO Water Based Dye (Orange) | https://amzn.to/302oyMj

• 1 Pint – General Finishes DPO Water Based Dye (Blue) | https://amzn.to/306BBMA

• 1 Pint – General Finishes DPO Water Based Dye (Empire Red) | https://amzn.to/307tQpS

• 1 Pint – General Finishes DPO Water Based Dye (Green) | https://amzn.to/2RRl9gh

• 1 Pint – General Finishes DPO Water Based Dye (Light Brown) | https://amzn.to/2RRT8p1

Tools

• Miter Saw | https://amzn.to/2XgnJCo

• Table Saw | https://amzn.to/2XfJliB

• Jig Saw | https://amzn.to/2XgMNt6

• Drill Kit | https://amzn.to/2FKP6tG

• Drill Press | https://amzn.to/2LE5Y94

• Fluted Drill Bits | https://amzn.to/2J6lSYi

• 24 in. Quick Grip Clamps (4 clamps) | https://amzn.to/2LrPlO2

• 40 in. Bessey REVOlution Parellel Clamp (4 clamps) | https://amzn.to/2XghYjj

• Nail Gun Kit | https://amzn.to/2LwpNzi (Optional)

• Air Compressor | https://amzn.to/2LyID95 (Optional)

• Orbital Sander | https://amzn.to/2LFAMqn (Optional)

• Dowel Jig kit | https://amzn.to/2FEuAee (Optional)

• Japanese Saw | https://amzn.to/3073Yu4 (Optional)

Hardware

• Hinge | https://amzn.to/2LriWHk

• Box Hinge | https://amzn.to/2FEjfej

• Table Lock Latch | https://amzn.to/2RFqmIb

• Carnival Rings | https://amzn.to/2Xxv9AR

Software

• Adobe Creative Cloud | https://amzn.to/2xpxKxM (Optional)

• SketchUp | www.sketchup.com (Optional)


Instructions

Step 1

You can purchase 2x4ft sheets of plywood or a full 4×8 sheet. I used (4) 2×4 foot sheets to make this project. I only went with the smaller sheets because I didn’t want to fit a full sheet in my minivan. Be sure to download the plans to get all the cut dimensions you need to make this project.

cutting+ring+half+inch+plywood+for+a+ring+toss+game

Step 2

After you have cut everything be sure to sand the plywood and break all the edges. I used a 220 grit sand paper.

Step 3

Make sure you dry fit everything together to ensure you have the sides cut correctly. Once it is all set you are ready for the next step.

making+a+box+for+ring+toss+game+half+inch+plywood+on+a+work+bench

Step 4

Next I applied Titebond® 3 Ultimate wood glue on all the edges. I only used glue to hold this box together.

Step 5

Once I applied all the glue I used my true and faithful Irwin and Bessey clamps to hold everything together and let it dry over night.

clamping+half+inch+plywood+for+a+ring+toss+game+using+Irwin+and+Bessey+clamps+on+a+work+bench

Step 6

next I installed the side supports for the rails that will hold the pins for the ring toss game.

adding+supports+in+a+half+inch+plywood+box+for+ring+toss

Step 7

I cut all the rails at the same time to ensure they were all the same length. I used one of my favorite tools in my shop my Bosch® Miter saw.

07+cutting+supports+using+a+bosch+12in+miter+saw

Step 8

After you cut all the rails you now need to drill the holes for the pins. You can use a drill press or a hand drill if you don’t have a drill press. Be sure to use a fluted drill bit.

drilling+holes+with+a+drill+press+for+the+ring+toss+dowels

Step 9

I used a General Finishes dye stain for my ring toss game. This gave me the vintage look I wanted.

09+dying+wooden+dowels+for+the+ring+toss+game+using+red+green+blue+and+orange+with+general+finishes

Step 10

Let the dye dry over night

10+stained+wooden+dowels+red+green+blue+orange+general+finishes

Step 11

After I dyed the dowels for the game I then stained the inside and outside of the box with a light brown color. This dye is water based and that was perfect for what I needed as I wanted to give this ring toss game a vintage look.

11+stained+ring+toss+box+with+light+brown+general+finishes+stain

Step 12

Next I applied a clear coat over the outside and inside of the box. Rather than using spray polyurethane I simply just used a clear gloss spray. It is much cheaper and does almost the same thing.

clear coat of varnish on the box

Step 13

This was the step that scared me the most. I only had one shot at applying the graphic to the wooden top. I did not want to mess it up as it cost me $40 to have it printed at Kinko’s. I was able to tap into my illustration minor in college and had fun designing this graphic for this project. let me know in the comments if you would like me to make this graphic available to purchase as it is currently not available with the plans.

applying+a+ring+toss+graphic+to+wood+in+a+work+shop

Step 14

This was one of the most rewarding parts of the build. Installing the box and back hinges. I could now see my game coming to life.

14+installing+a+toy+box+hinge+for+the+lid+of+a+ring+toss+game

Step 15

Install the rails, pins and hardware and you are now ready to play ring toss.

15+vintage+carnival+ring+toss+game+on+a+work+bench

I hope you enjoyed this wood project and if you have any questions please level them in the YouTube video or on this page. If you haven’t already please follow me on YouTube and my other social media platforms. If you have made this project please share your photos and progress. Happy Building!

Shareable Pinterest Pin | How to Make a Vintage Ring Toss Game in a Box

Ring_Toss_Pin

 

pmiller

This is a paragraph.It is justify aligned. It gets really mad when people associate it with Justin Timberlake. Typically, justified is pretty straight laced. It likes everything to be in its place and not all cattywampus like the rest of the aligns. I am not saying that makes it better than the rest of the aligns, but it does tend to put off more of an elitist attitude.

Leave a Reply

Your email address will not be published. Required fields are marked *

0